VVS Diamond, VS Diamond, Diamond Clarity

When it comes to diamonds, the two main categories of clarity are VVS and VS. But what exactly is the difference between these two types of diamond clarity? And how do you determine which one is right for you?

In this comprehensive guide, we’ll explore everything you need to know about VVS and VS diamonds in terms of their clarity. We’ll also discuss the pros and cons of each type of diamond so that you can make an informed decision when choosing your piece of jewelry.

How to Determine Which Type of Diamond Clarity is Right for You

The fewer blemishes or inclusions and the less visible they are to the naked eye, the higher the clarity grade will be. There are six different grades of diamond clarity ranging from Included (I) to Flawless (FL), so how do you know which type of diamond clarity is right for you?

Here is a brief overview of each grade to help you determine which type of diamond clarity is right for your needs and budget:

Included (I):

Inclusions are easily visible under 10x magnification by a trained gemologist. I-grade diamonds typically have numerous large inclusions that may affect durability or beauty. However, these stones tend to be more affordable than other grades because they’re not as rare.

Flawed (IF):

These stones also have visible inclusions under 10x magnification but they will be less severe than those found in I-graded diamonds. IF-grade stones usually have one large inclusion or several small ones which don’t significantly affect appearance or strength.

Again, these imperfections make these diamonds more affordable compared to others with no flaws present.

Very Slightly Included (VVS1 & VVS2):

Very slightly included means that tiny imperfections can only be seen by an expert using specialized equipment at close range. Under normal viewing conditions, these stones appear flawless.

VS1 and VS2 refer to very slight differences in size, location, quantity, and nature of inclusions that are difficult to discern even for expert graders. This is why these diamonds are more expensive since they’re considered top-of-the-line quality.

Slightly Included (SI1 & SI2):

Slightly included means inclusions are present and visible under 10x magnification, but they won’t affect the overall appearance of the diamond. SI1-graded stones have inclusions that tend to be small and not very noticeable, while those with an SI2 grade will have slightly larger or more numerous blemishes.

These diamonds provide good value for your money as they offer great clarity at a lower price point than VVS or Flawless grades.

I3:

I3-grade diamonds have large, easily visible inclusions that significantly affect the stone’s strength and beauty. This kind of diamond will likely stand up to wear over time.

Now that you know more about each grade of diamond clarity, you can start shopping for the perfect stone within your budget! Keep in mind that even though flawless diamonds are rarer and therefore more expensive, there are still many beautiful options available at lower clarity grades.

Key Takeaway: The clarity of a diamond is graded on a 6-point scale, with I3 being the lowest quality and FL being flawless.

The Pros and Cons of VVS and VS Diamonds

The first thing is the 4 Cs:

Carat weight, clarity, color, and cut. Another factor that will affect your decision is whether you want a VVS or VS diamond. So, what’s the difference between these two types of diamonds?

Here we will go over the pros and cons of each one so that you can make an informed decision on which type of diamond is right for you.

VVS (Very Very Slightly Included) diamonds have inclusions that are very difficult to see even under 10x magnification by a trained gemologist. These inclusions do not usually interfere with the light passing through the stone which means they don’t affect its sparkle or brilliance. Because they have such small inclusions, VVS diamonds are also less likely to chip or break than other stones with larger inclusions.

On the downside, VVS diamonds tend to be more expensive than VS (Very Slightly Included) stones because they are much rarer; only 1% of all mined rough crystals qualify as being flawless enough to receive this designation from GIA—the Gemological Institute of America—which is responsible for setting industry standards when it comes to grading gems.

In addition, while their tiny size might make them appear flawless at first glance without proper examination, upon closer inspection most people can still spot some blemishes since no natural crystal is completely perfect.

Now let’s move on to VS (Very Slightly included) Diamonds which have minute imperfections called “inclusions” which include internal graining lines, minuscule cracks known as feathers, and clouds.

However, these inclusion does not hamper nor alter light performance inside the diamond due to its extremely small size. Due to this fact, 90% of all GIA-certified loose diamonds sold fall under vs category. As we know more common something becomes lesser value It holds!

That’s why VS Diamonds costs 20-40 percent lower than VVS.

Key Takeaway: In general, VVS diamonds are more expensive than VS diamonds because they are much rarer. However, VS diamonds tend to have minute imperfections that can be seen upon closer inspection.

Factors to Consider When Choosing a Diamond Clarity Grade

When choosing a diamond, clarity is one of the main factors to consider. The clearer the diamond, the more expensive it will be. However, not all diamonds need to be completely clear to be beautiful and sparkly.

Here are some things to keep in mind when choosing a clarity grade for your diamond:

The size of the diamond: A small inclusion may not be noticeable in a large stone but can look prominent in a smaller one.
The type of setting: A prong setting can show off a stone better than an enclosed setting like a bezel or pavé because light can enter from all angles.
Your budget: VS2 stones are less expensive than VVS1 stones but still have great clarity. If you’re looking for a high-quality diamond with few inclusions, choose a VVS or VS clarity grade.

However, keep in mind that VVS diamonds will be more expensive than VS diamonds. When consulting with a qualified jeweler, take into account the size of the diamond, the type of setting, and your budget to find out which clarity grade is right for you.

Key Takeaway: Choose a VVS or VS clarity grade for high-quality diamonds with fewer inclusions.

Tips for Buying a Diamond with the Right Clarity Grade

When it comes to buying a diamond, clarity is often one of the most important factors to consider. After all, who wants to spend good money on a diamond that looks dull and cloudy? However, with so many different grades of clarity out there, it can be tricky to know which one is right for you.

Here are some tips for choosing the right clarity grade:

Consider your budget: Clarity can have a big impact on the price of a diamond, so make sure you take this into account when setting your budget. If you’re working with a limited amount of money, then opting for a lower clarity grade may be the way to go.
Think about where the diamond will be worn: Another thing to keep in mind is how often you plan on wearing the diamond. If it’s something that you’ll be using every day (e.g., an engagement ring), then choosing a higher quality Diamond grading scale gemological institute American Gem Society might not make sense since it’s more likely to get scratched or damaged over time.
Take into account the other 4Cs: Keep in mind that clarity is just one of the Four Cs of diamonds (cut, color, carat weight, and condition). When making your decision, be sure to consider all four factors.
Work with a qualified jeweler: This is perhaps the most important tip on this list. Choosing the right clarity grade for your diamond is not always an easy task. If you’re feeling unsure about which grade to choose, then working with a qualified jeweler can be immensely helpful. They will be able to guide you through the process and help you make an informed decision based on your specific needs and wants.

By following these tips, you should have no problem finding a diamond with the perfect clarity grade for you!

Key Takeaway: The clarity of a diamond is important, but it is just one of the Four Cs of diamonds. Work with a qualified jeweler to find the right clarity grade for you.

FAQs about VVS Diamond, VS Diamond, Diamond Clarity

Which diamonds are better VS or VVS?

There is no definitive answer to this question as it depends on personal preference. Some people prefer VS diamonds because they are less expensive, while others prefer VVS diamonds because they are of a higher quality.

Ultimately, the decision comes down to what the buyer is looking for and their budget.

Is VVS diamond clarity good?

VVS diamonds are very good in terms of clarity. They have minute inclusions that can only be seen with a 10x loupe or microscope.

VS diamonds also have small inclusions, but they are slightly larger and more visible than those of VVS stones.

What’s higher than VVS?

The highest level of diamond clarity is IF, which stands for Internally Flawless. This means that the diamond appears perfect to the naked eye and contains no blemishes or inclusions when viewed under 10x magnification. However, there are still very few diamonds that receive this grade since it is so difficult to find a completely flawless stone.

The next highest clarity grades are VVS1 and VVS2, which stand for Very Very Slightly Included. These diamonds contain tiny inclusions that can only be seen under close inspection with a loupe or microscope. VS1 and VS2 stand for Visibly Included; these stones have slightly larger inclusions but they are still not easily visible to the untrained eye.

I1-I3 clarity grades indicate an inclusion that is visible without any special equipment; these should be avoided if possible as they will affect the beauty of the diamond.

What’s better VVS or VS1?

In general, VVS diamonds are better than VS1 diamonds. This is because VVS diamonds have higher clarity ratings, meaning that they contain fewer inclusions and blemishes.

As a result, VVS diamonds tend to be more brilliant and sparkly than VS1 diamonds. However, it should be noted that both grades of diamond are considered to be of very high quality.

So, the decision comes down to personal preference.

Conclusion

If you’re looking for a diamond with excellent clarity, then a VVS diamond is an ideal choice. However, these diamonds can be more expensive than VS diamonds.

If cost is a factor in your decision-making process, then a VS diamond may be a better option for you. Whichever type of diamond you choose, make sure to do your research so that you end up with a piece of jewelry that you’ll love for years to come!

If you’re looking for the best deals on diamonds, look no further than Shira-Diamonds. We offer a wide variety of diamonds at amazing prices, and our team is always available to help you find the perfect diamond for your needs. Whether you’re looking for a loose diamond or need help picking out the perfect engagement ring, we’re here to help. Contact us today to learn more about our services and how we can help make your dream diamond a reality!